Tape and disc formats at a glance: widths, speeds, tracks and sample rates

Before you can transfer a recording you have to know what it is. This page gathers, in one place, the basic numbers of the tape and disc formats that turn up most often in family collections and secondhand boxes: how wide the tape is, how fast it runs, how the tracks are laid out, and, for the digital formats, how the sound was coded.

Figures are the published standard values; individual machines and tapes can differ, and many decks offered more than one speed or mode. Each row links to the guide on this site that explains the transfer in detail. Last checked: 22 November 2026.

Analogue tape

FormatIntroducedTape widthSpeedTracksWhere to read more
Open reel (home)1950s¼ inch (6.35 mm)1⅞, 3¾ or 7½ ips (4.76, 9.53, 19.05 cm/s)Usually quarter-track stereo; older or simpler decks full- or half-track monoTape transfer guide
Open reel (studio)1940s onwards¼ inch for stereo masters; ½, 1 and 2 inch for multitrack15 or 30 ips (38.1 or 76.2 cm/s)Full-track mono, half-track (two-track) stereo, multitrackBuying a reel-to-reel deck
Compact Cassette1963 (Philips, Berlin Radio Show)3.81 mm1⅞ ips (4.76 cm/s)Four tracks: one stereo pair per sideBuying a cassette deck
Microcassette1969 (Olympus)3.81 mm2.4 cm/s, or 1.2 cm/s for long playMono, two sidesTape transfer guide
8-track cartridge1964–65 (Lear consortium)¼ inch, endless loop3¾ ips (9.53 cm/s)Eight tracks: four stereo programmesTape transfer guide
Elcaset1976 (Sony, Panasonic, Teac)¼ inch3¾ ips (9.53 cm/s)Stereo, two sidesTape transfer guide

What the numbers change during a transfer

Cassette tape types

IEC typeCoatingHow the deck tellsNotes
Type IFerric (iron oxide)Write-protect notches onlyThe ordinary, "normal bias" cassette
Type IIChromium dioxide or cobalt-doped ferricExtra pair of notches beside the write-protect tabs"High bias"; quieter than Type I
Type IIIFerrichrome (two layers)No separate notchRare, short-lived
Type IVMetal particleA third set of notchesIntroduced in 1979; needs a metal-capable deck to record

The type matters for playback equalisation and, when recording, for bias. More on choosing and testing a deck in buying a vintage cassette deck.

Digital tape and disc

FormatIntroducedMediumCodingSample ratesWhere to read more
DAT (Digital Audio Tape)1987 (Sony)3.81 mm tape, rotary-head (helical scan), 8.15 mm/s at 48 and 44.1 kHz16-bit linear PCM; long-play mode 12-bit non-linear at 32 kHz, doubling running time48, 44.1, 32 kHzGetting audio off DAT
DCC (Digital Compact Cassette)1992 (Philips, Matsushita)Cassette-width tape at 4.76 cm/s, stationary multitrack headPASC, a data-reduced code fixed at 384 kbit/s48, 44.1, 32 kHzTape transfer guide (DCC decks also play analogue cassettes)
MiniDisc1992 (Sony)64 mm magneto-optical disc in a cartridgeATRAC, about 292 kbit/s in standard (SP) mode; later MDLP long-play modes (LP2, LP4) at lower rates44.1 kHzMiniDisc to digital
Hi-MD2004 (Sony)1 GB Hi-MD disc, or a standard MiniDisc formatted as Hi-MDLinear PCM or ATRAC3plus44.1 kHzMiniDisc to digital

The rule for digital formats

A DAT, DCC or MiniDisc already holds digital audio. The best copy keeps it exactly: take the stream from the digital output at the tape's own sample rate, with no conversion. For DAT the bit-for-bit route is straightforward; for MiniDisc and DCC the data-reduced code is decoded by the player, so a capture from the optical output is the practical ceiling, and it should not be "improved" afterwards.

Capture settings for the files you keep

For analogue tape, archive guidance is consistent: IASA's technical guidelines (IASA-TC 04) recommend at least 48 kHz and 24 bits for preservation copies, and many institutions work at 96 kHz and 24 bits. Michigan State University Libraries publish their capture specifications for audio and video, a useful model for a home archive. Keep the untouched master in WAV, Broadcast WAVE or FLAC and make compressed listening copies from it; our home archive plan covers naming, metadata and backups.

Identifying a mystery tape

  1. Read everything on the box, reel and label: speed, "2-track" or "4-track", "NAB" or "CCIR", Dolby or dbx, date.
  2. Measure the tape width and the reel or hub size. A 10½-inch reel with a large metal hub is almost always a studio or semi-professional tape.
  3. Look at the pack: a smooth, even wind is a good sign; shed oxide, a vinegar smell or a squeal on a test wind are reasons to stop and read about sticky shed and acetate tapes first.
  4. Play a short, unimportant stretch and listen for speed, direction and brightness before committing to a full transfer.

Unfamiliar words on a label or a spec sheet? The audio glossary explains them in a sentence or two.

Sources

  1. Wikipedia, Reel-to-reel audio tape recording, Cassette tape, Digital Audio Tape, MiniDisc, Digital Compact Cassette, Microcassette, 8-track cartridge and Elcaset, consulted November 2026, and the references they cite.
  2. IASA, IASA-TC 04, Guidelines on the Production and Preservation of Digital Audio Objects, 2nd edition, 2009.
  3. Michigan State University Libraries, Media preservation capture specifications.
  4. John W. C. Van Bogart, Magnetic Tape Storage and Handling: A Guide for Libraries and Archives, CLIR, 1995.
  5. Library of Congress, Care, Handling, and Storage of Audio Visual Materials.